|
|
|
| |
 |
FWPV8 and FWPV12 Outback FLEXware PV Combiner Boxes
The FLEXware PV8 and PV12 combiner boxes allows you to combine PV array outputs into one box. Breakers or or fuses can be installed on DIN rails. The box is NEMA-3R rainproof, power coated aluminum and can be mounted on a wall, slope roof or a pole.
The FLEXware PV8 and FLEXware PV12 accommodate overcurrent protection requirements for off-grid and grid-connected applications. The DIN rail can be fitted with 150VDC circuit breakers for low-voltage PV arrays or 600VDC fuse holders for grid-tie arrays. These combiners replace the PSPV.
Dual output lugs allow connection for up to 2/0 AWG wire to run combined PV voltage to inverter or charge controller. Negative and ground terminal bus bars are included. Fuses and/or breakers are not included.
Outback Flexware PV Combiner Boxes
| Model |
# of breakers |
# of fuses |
dimensions |
weight |
Item No. |
Price |
FWPV8
|
8 |
6 |
15.2 x 9.2 x 3.9 |
4.4 lbs |
OUTPV8 |
$125 |
FWPV12
|
12 |
8 |
15.2 x 12.7 x 3.9 |
5.9 lbs |
OUTPV12 |
$165 |
|
|
AIR X 400WMPPV6 Midnite Solar Combiner Boxes
NEMA-3R powder coated aluminum rainproof array combiner. Accepts 150VDC DIN-rail mounted fuse holders for 600VDC arrays or 150VDC DIN-rail mounted breakers for low-voltage arrays. Dead front. ETL Listed. Includes negative bus bar and ground bar. Breakers and fuse holders are not included.
Midnite Solar Combiner Boxes
| Model |
breakers |
fuses |
size |
lbs |
Item code |
Price |
MNPV3
|
3 |
N/A |
10.5" x 5" x 3.5" |
2 |
MIDS3 |
$85 |
MNPV6
|
6 |
4 |
13" x 8" x 3.5" |
4 |
MIDS6 |
$105 |
MNPV12
|
12 |
8 |
14" x 9" x 3.5" |
6 |
MIDS12 |
$135 |
MNPV16
|
N/A |
16 |
17" x 13" x 3.5" |
12 |
MIDS16 |
$495 |
|
| |
|
|
|
| |
|
|
div class="gt"
